Ampoule Wet Glue Labeling Machine

This Ampoule Wet Glue Labeling Machine is used to apply the Paper label on cylindrical container like Ampoule at higher speed up to 200 Ampoule per minute in pharmaceutical industries. Model is designated as NHL-200A.

Manufacturer of Ampoule wet glue labeling machine

Ampoule Wet Glue Labeling Machine

Chronology of Machine operation

  • The Loading Screw releases containers into a Transfer Wheel in which containers each held between a pair of rollers and back up guide are passed to the labelling station in a upright position
  • The labels are taken from the stack in a label box. The glue segment coated with glue by a rubber roller takes the label by means of adhesion out of oscillating Label box and moves them to the labeling cylinder
  • With its mechanically actuated fingers the labeling cylinder takes over the glue coated labels which are at the same time held by vacuum and passed them to the container
  • At the instant when the label touches the containers, the vacuum is released and label is glued to the container
  • The labeled containers from the Transfer Wheel are pushed into a unloading tray

Technical specification:

Particular Specification
Direction Left to Right from operator side
Glue Cold Dextrine Base Glue or other glue which does not create any fibres or threading during rotation, water soluble glue is required
Electrical 415 Volts, 3 Phase, 5 Wire system, 50 Cyeles/Sec.
Power 1 HP gear motor, 1 HP 415 volts, 3 phase, for vacuum pumps
Finish SS Matt finish
Speed / Minute 160 to 200 Ampoule per minute
Conveyor height 830-875 mm*
Overall dimension 1530 x 1650 x 1280 mm

 

Machine input Material specification:

Label Height 21 mm to 50 mm
Label Length 25mm to 50 mm
Ampoule dia 9.5mm to 17 mm
Label GSM 52 to 54