This Ampoule Wet Glue Labeling Machine is used to apply the Paper label on cylindrical container like Ampoule at higher speed up to 200 Ampoule per minute in pharmaceutical industries. Model is designated as NHL-200A.
Chronology of Machine operation
- The Loading Screw releases containers into a Transfer Wheel in which containers each held between a pair of rollers and back up guide are passed to the labelling station in a upright position
- The labels are taken from the stack in a label box. The glue segment coated with glue by a rubber roller takes the label by means of adhesion out of oscillating Label box and moves them to the labeling cylinder
- With its mechanically actuated fingers the labeling cylinder takes over the glue coated labels which are at the same time held by vacuum and passed them to the container
- At the instant when the label touches the containers, the vacuum is released and label is glued to the container
- The labeled containers from the Transfer Wheel are pushed into a unloading tray
Technical specification:
Particular | Specification |
Direction | Left to Right from operator side |
Glue | Cold Dextrine Base Glue or other glue which does not create any fibres or threading during rotation, water soluble glue is required |
Electrical | 415 Volts, 3 Phase, 5 Wire system, 50 Cyeles/Sec. |
Power | 1 HP gear motor, 1 HP 415 volts, 3 phase, for vacuum pumps |
Finish | SS Matt finish |
Speed / Minute | 160 to 200 Ampoule per minute |
Conveyor height | 830-875 mm* |
Overall dimension | 1530 x 1650 x 1280 mm |
Machine input Material specification:
Label Height | 21 mm to 50 mm |
Label Length | 25mm to 50 mm |
Ampoule dia | 9.5mm to 17 mm |
Label GSM | 52 to 54 |